Module 3 of the warehouse induction

Forklift Operator Induction

Every shift at Northgate's Kingsway DC starts with the same two minutes: a walk around the truck before the first lift. This module shows you what to check, how much the truck can carry, and what to do when something fails.

Start with the six checks →
Illustration of a counterbalance forklift carrying a pallet

What you'll be able to do

10 min

Run the pre-start check

Walk the six checks in order, engine off then engine on.

5 min

Read the data plate

Work out whether a load is inside the truck's rated capacity.

5 min

Know when to stop

Sort faults into pass or tag out, then pass the final check.

Watch the walkaround first

The six checks in 14 seconds. Page 2 goes through each one.

How this module works

There are five short pages. Pages 2 to 4 are hands-on: click the truck, move the sliders, drag the cards. Page 5 is a five-question check. You need 80% to complete the module, and your progress is saved as you go.

Northgate Logistics and everyone in this module are fictional. The checks follow common pre-start practice, but always use your own site's procedure.